Elasticity
发布于：2024-09-04
Purpose:
Apply elasticity to external contour lines / internal structural lines, allowing the lines in 3D to stretch or contract.
Operation Path:
Edit Pattern ▶ Select Outer Contour Lines / Inner Contour Lines ▶ Property Editor ▶ Elasticity
Operation Instructions:
Check the option to enable the elasticity effect.
The Ratio represents the percentage between the line length after 3D simulation and the original line length in 2D. The maximum value is 200%, meaning the line can be stretched up to twice its original length.
Alternatively, you can directly edit the Length value to define the exact segment length.
Feature Description：
| Strength | Defines the elasticity force. The higher the value, the stronger the contraction force of the elastic behavior. |
Ratio(%) | Controls the stretch-and-shrink ratio of the elasticity.
| |
Segment Length(cm) | Indicates the total length of the selected line after applying the adjusted ratio. | |
Total Length(cm) | Indicates the total length of the selected line after applying the adjusted ratio. | |
Inward Gradation | When enabled, sets the smooth gradient distance for elastic contraction. |
