4.5.Fabric Tensile Test

(1) Secure the measurement sample with the upper and lower clamps. Please note:  ensuring that the clamp opening is aligned with the marked lines on the fabric, and the clamping length of the jaws is 1cm.

                                                            

(2) Click the 'Measure' button on the Physical Properties interface to initiate the test.

(3) Wait for the measurement to complete, open the clamps, remove the fabric, and conclude the measurement.

(4) Replace another measurement sample and repeat steps (1) to (3).

(5) Click 'Compute,' and the fabric's physical properties information will be generated.