Trace
发布于：2024-09-04
Purpose:
With DXF pattern information, generate internal lines from baselines.
Operation Path:
Home ▶ Trace
Operation Instructions:
- Press Enter after the baseline is selected to generate an internal line from the selected baseline. You can double-click on the shape made of baselines to select the entire shape.
- Right-click and select "Trace as Internal Shape" to generate an internal shape rather than as disconnected line segments. The right-click menu also supports cropping.
Trace right-click menu | ||
|---|---|---|
Convert to Internal Line/Shape | Convert Selected Base Line to Multiple Internal Lines | Do not keep the original base line. |
Convert to Internal Shape | Directly convert selected connected base lines into an internal shape. | |
Trace as Pattern | Convert selected base lines (either connected or multiple edges forming a shape) into a pattern piece. | Keep the original base line. |
Trace as Internal Line/Shape | Generate multiple internal lines from the selected base lines. | |
Trace as Internal Shape | Generate an internal shape from selected connected base lines. | |
Convert to Symmetry Axis | Generate dart lines from the selected base lines. | |
Cut | Cut the pattern piece based on the selected base lines. | |
CutandSew | Cut the pattern piece based on the selected base lines and apply sewing. | |
Note: Only the Outline Drawing function allows selecting or deleting base lines; other functions cannot operate on base lines. Tutorial lines do not participate in triangulation during simulation and do not affect the simulation.
The right-click menu option "Outline as Panel" now supports generating panels from multiple edges that are not connected end-to-end, requiring manual selection of internal lines, as shown in the figure below:
