Docs

Garment Properties

发布于：2024-11-21

1. Modification of physical properties and processes

1.1 Garment Editing Interface Interaction

Double-click on the Meta Data Asset of the garment in the Content folder to open the garment editing interface

Concepts

  • Cloth Pieces: Plate Processes (changes take effect for individual plates only)
  • Fabric Styles: (changes take effect on all plates that reference the fabric)
Interactive
  • Window to select a plate, highlight the plate when it is selected, and filter the right property bar to show only the information of the plate.
  • After selecting a plate, set the plate to be hidden in Cloth Piece
For multi-layer garments, you can hide the outer layers one by one to make it easier to select and view the inner layers without blocking them.
To unhide a plate, click on an empty space outside the garment in the left window.
2.0.0 New Interactions
Right-click on a selected plate in a 3D viewport to hide or show it.

1.2 Interpretation of physical properties of fabrics

Comment
Enter Fabric Styles to adjust the physical properties of the fabric, the physical property adjustment is similar to the fabric properties in Style3D Studio:
Physical properties of fabrics include: Stretch of fabrics in three directions, Bending, Bucking Ratio, Bucking Stiff, Static and Dynamic Friction, Weight, and Thickness.
Physical Property
Connotation
Numeric Range
Stretch Warp/Weft/Bias
Warp/weft/oblique strength direction
  1. The higher the value, the less likely the fabric will stretch in the warp/weft/skew direction, the tighter the fabric will be
    Comment
  2. The smaller the value, the more likely the fabric will be pulled apart and the looser the fabric will be.
    Comment
Comment
0--100
Bending Warp/Weft/Bias
Warp/weft/skew bending strength.
  1. The higher the value, the less likely the fabric will bend in the warp/weft/diagonal direction, the harder it will wrinkle, and the stiffer it will appear
    Comment
  2. The lower the value, the more folds in that direction, the softer the fabric looks
    Comment
Comment
0--100
Bucking Ratio Warp/Weft/Bias
It is used to control how many folds are recognized in the warp/weft/diagonal direction that need to be deformed, the higher the deformation rate, the more folds can be refined.
The deformation rate and the deformation strength should be used in conjunction, adjusting only one of them has no effect, it is used to refine some of the folds.
0--100
Bucking Stiff Warp/Weft/Bias
Used to control the degree of refinement of the folds identified in the warp/weft/diagonal direction, the value represents the percentage of the original bending value that has changed at the fold.
Final bend value at the fold = Original bend * Deformation strength
  1. The higher the value of Transformation Strength, the lower the reduction of the final adjustable bending value at the fold, the larger the final result, the smoother the turn, the stiffer the fabric.
    Comment
  2. The smaller the value of the deformation strength, the smaller the value of the bend at the final adjustable pleat, the larger the final bend of that pleat, the sharper and finer the pleat, the softer the fabric
    Comment
Comment
0--100
Dynamic Friction
Static Friction
Fabric friction coefficient, which determines the extent to which the fabric resists relative motion when it collides with itself, passive objects, and other objects sharing the same solver
0--1
Weight
Determines the self-supporting force that affects the drape performance of the fabric.
0--2100
Thickness
Thickness of fabric during simulation for collision adjustment
0--1000

1.3 Explanation of the properties of the plate process

Select the plate and modify the plate process properties in Cloth Pieces:
Attention:
Enable Seam Taping is checked so that changes to the properties in Bond Property will take effect on the plate.
Plate process is the physical effect of setting up a single plate, commonly used processes are gluing, form curing, fabric thinning, etc. More definitions can be found in the Studio Help Center.
Technique
Connotation
Numeric Range
Bond
Increased physical properties of the plate to make it less prone to deformation and stretching during simulation.
Sub-parameter ranges are the same as fabric physical properties
Skive
Physical properties of the plate are reduced based on the original physical properties as opposed to sticky lining (Percentage)
0--100
Solidify
Keeps a plate in its simulated form, the higher the form curing strength, the less likely the plate will deform after curing.
0--100
Pressure
The effect of a plate expanding in the normal direction under the action of a filler such as fluff or cotton.
The larger the value, the more the plate expands in the positive direction of the normal.
The smaller the value, the more the plate collides in the negative direction of the normal.
-100--100
Freeze
Frozen plates simulate collisions without deformation.
On/Off
Strengthen
Temporarily stiffen the plate during simulation in order to remove the effect of folds on the shape of the plate.
On/Off
Deactivate
Failed plates do not participate in the simulation and collision, and no effect is activated in the 3D window when set.
On/Off
Shrinkage Ratio Weft/Warp
Simulated shrinkage of the plate in the warp and weft directions
The larger the value, the more the plate is stretched in the warp and weft directions during the simulation.
The smaller the value, the more contracted the plate is simulated in the warp and weft directions.
0--100
Pattern Unused
Checking the "Do not use" box will remove the movie from the 3D scene, unchecking the box will allow you to use it normally.
On/Off

1.4 Fabric physical property presets

Preset selectable property presets
  • The preset is displayed as Custom customized parameter when SMD is initially imported.
  • Selecting a preset and saving it applies the physical properties of the preset.
  • Reset the preset to return to the initial Custom parameters.

1.5 Apparel Parts Visibility Control

Under the Visibility group in the Apparel panel, you can set the display and hiding of apparel-related parts.
Button
Button Hole
Cloth Piece
Graphic
Piping
Render Proxy
High Polygon Model Rendering Mesh
Topstitch
Open Thread
Trim
Accessories (accessories other than buttons, zippers, inserts)
Zipper
Zipper Teeth

2. Modify Garment Material

Material Interfaces show the list of all materials of the garment, you can replace the material or double click the material ball to enter the setting interface.
When you select a plate in the preview window, the plate material is automatically displayed in the property bar.
Feedback title
Generic prev page
Simulation Parameters
Generic next page
Metahuman Simulation Setting