2.1.3D Scanner Installation

(1) Place the Scanner on a suitable flat table.

(2) Assemble the power cord and power adapter together, and connect it to the power port of the device (pay attention to the direction of the port).

(3) Connect the USB data cable with a Type B to the 'Data Control' port on the device, and connect the Type A to the USB 3.0 port on the PC host.

                 

(4) Camera Preparation:

① Open the lens cover, align the lens white marking dots with the camera white marking dots, install the lens, and rotate it counterclockwise about 60° until you hear a 'click' sound, indicating that the lens is securely installed.

② Set the live view selector to Video Live View.

③ Switch the lens focus mode to M/A autofocus.

④ Switch the camera focus mode to AF autofocus.

⑤ Turn on the camera and remove the lens cap.

(5) Place the SLR camera vertically downward on the camera bracket, gently press it down until it touches the rubber seat limit, then tighten the thumb screws, and connect the camera communication cable and power supply cord.

(6) Connect the USB data cable and power supply cord, and turn on the power switch.

(7) Installation complete.